PermitDig
ElectricalIssued

Installation of 20-amp circuit breaker at Main Electric Panel for electric to pergola. Light gauge, pre-manufactured metal patio covers and awnings are exempt from building permit but not from zoning ordinance requirements. Maintain a minimum of 2-ft from overhang to the property lines to comply. Keep in mind if it is modified or changed from what the manufacturer's installation has approved it for then it will require a permit. Electrical to be installed per 2023 NEC requirements and SRP standa

10317 E UTOPIA AVE, Mesa, AZ

Permit Details

Permit Number
PMT26-17617
Type
Electrical
Status
issued
Issued Date
October 19, 2026
County
Mesa, AZ
View on county site

Parties

Contractor
Elizabeth Sykes

About Electrical Permits in AZ

0

Electrical permits in AZ

Other Permits in Mesa, AZ

New Master Plan Blandford Homes #4503 – Encanto. 3615 S.F livable, 1208 S.F. non-livable. Two story with a 2 car garage. Elevation options A, B, F, G, H, I, and J. Options second flr at elev. B and J +95 S.F. non-livable pop outs and balcony. Options for a 2 ft and 4 ft ext at garage. Option for a smaller loft -75 S.F livable. Options on floorplan are Den or Bedroom 7 at dining. Den at bedroom 6. Other options of Fireplace, Walk-in-Shower, enlarged bedroom 2 and 5, bedroom 2 at loft, and multi

3101 E ELMWOOD ST · PMT25-23465

CITY OF MESA ZONING CLEARANCE PERMIT ONLY FOR INSTALLATION OF 16-FT X 56-FT 2026 ABOVE GROUND SET CLAYTON MANUFACTURED HOME, SERIAL NO. BUC017865AZ WITH A/C AT REAR. GAS. ONE 11-FT X 40-FT AWNING PER ICCESR 1398. NO OTHER ACCESSORY STRUCTURES AT THIS TIME. MINIMUM TWO 9-FT X 18-FT PAVED UNOBSTRUCTED PARKING SPACES REQUIRED BEHIND THE FRONT SETBACK WITH ONE COVERED AND BOTH ON 2-IN ASPHALT OR 4-IN CONCRETE. 40-FT X 75-FT INTERIOR LOT. MINIMUM SETBACKS ARE 1-FT FRONT, 4-FT REAR, 3-FT MH SIDE, 1-FT

345 S 58TH ST 94 · PMT26-11394

Installation of one 31 sq ft LOGO GENSERVE Front-lit LED channel letters: white acrylic faces with 3M 3630-XX translucent vinyl overlay and “Gen” in 3M day/ night vinyl: 3” metal returns painted black: standard trip cap painted black: flush stud-mounted.. Signs shall be installed per NEC 2023 with UL listed components.

5317 E MAIN ST · PMT26-10495

Install one LED illuminated pan channel letter sets and logo to south elevation of building MOUNTAINSIDE FITNESS 118 sq. ft. Signs shall be installed per NEC 2023 with UL listed components. Ref BOA26-00041

9311 E CADENCE PKWY · PMT26-10377

Tenant improvement in existing 868,431sf 3-story addition for a data center., IB construction, B/ S-1/ S-2 Occupancy. First, second, and third floor build out and installation of electrical, mechanical, and plumbing equipment. Special inspection for fire caulking and emergency responder radio coverage. Deferred fire sprinklers and fire alarms. • 1st floor buildout includes support spaces, and 2 data hall • 2nd floor buildout includes storage, office, support spaces, and a data hall • 3rd fl

3856 S EVERTON TERR · PMT24-20204

Similar Electrical Permits

Install 80.064 kW Tesla Solar Roof system at existing SFR, including six Powerwalls and six Expansion Packs.

Mesa, AZ · PMT26-13683

PERMIT IS ONLY FOR THE INSTALLATION OF ONE FRANKLIN APOWER 2 BATTERY. ALL WORK TO BE PERFORMED PER 2024 IRC, MANUFACTURE’S INSTALLATION INSTRUCTIONS AND SERVICE UTILITY PROVIDER SPECIFICATIONS. PERMIT DOES NOT INCLUDE PHOTOVOLTAIC SYSTEM INSTALLATION. DO NOT DISCONNECT UTILITY WIRES OR METERS. SCHEDULE DISCONNECT/RECONNECT WITH THE SERVING UTILITY AND OBTAIN UTILITY SERVICE REQUIREMENTS SPECIFIC TO YOUR SCOPE OF WORK. FAILURE TO SCHEDULE DISCONNECT MAY RESULT IN ADDITIONAL UTILITY TRIP CHARGE FE

Mesa, AZ · PMT26-17319

PERMIT IS ONLY FOR INSTALLATION OF ONE TESLA POWERWALL 3 BATTERY. ALL WORK TO BE PERFORMED PER 2024 IRC, MANUFACTURE’S INSTALLATION INSTRUCTIONS AND SERVICE UTILITY PROVIDER SPECIFICATIONS. PERMIT DOES NOT INCLUDE PHOTOVOLTAIC SYSTEM INSTALLATION. DO NOT DISCONNECT UTILITY WIRES OR METERS. SCHEDULE DISCONNECT/RECONNECT WITH THE SERVING UTILITY AND OBTAIN UTILITY SERVICE REQUIREMENTS SPECIFIC TO YOUR SCOPE OF WORK. FAILURE TO SCHEDULE DISCONNECT MAY RESULT IN ADDITIONAL UTILITY TRIP CHARGE FEES

Mesa, AZ · PMT26-17818

PERMIT IS ONLY FOR THE INSTALLATION OF ONE TESLA POWERWALL3 BATTERY. ALL WORK TO BE PERFORMED PER 2024 IRC, MANUFACTURE’S INSTALLATION INSTRUCTIONS AND SERVICE UTILITY PROVIDER SPECIFICATIONS. PERMIT DOES NOT INCLUDE PHOTOVOLTAIC SYSTEM INSTALLATION. DO NOT DISCONNECT UTILITY WIRES OR METERS. SCHEDULE DISCONNECT/RECONNECT WITH THE SERVING UTILITY AND OBTAIN UTILITY SERVICE REQUIREMENTS SPECIFIC TO YOUR SCOPE OF WORK. FAILURE TO SCHEDULE DISCONNECT MAY RESULT IN ADDITIONAL UTILITY TRIP CHARGE FEE

Mesa, AZ · PMT26-18797

Install circuit for Oven

Mesa, AZ · PMT26-19119

About Electrical Permits in Mesa, AZ

What is a Electrical permit?

A Electrical permit authorizes specific construction or renovation work at a property. It ensures the work meets local building codes and safety standards. Most jurisdictions require permits for structural changes, electrical work, plumbing, roofing, and demolition.

How long does this permit remain valid?

Permit validity varies by jurisdiction. In Mesa, AZ, permits typically remain valid for 6-12 months from the issue date. Contact the local building department for specifics.

Where does this data come from?

This permit record comes from Mesa, AZ's public records, sourced via their open data portal. All building permit data in the US is public record. PermitDig aggregates this data to make it searchable.